15710
1.INSTALL OIL COOLER ASSEMBLY
Install a new oil control valve filter to the cylinder block sub-assembly.
Install 2 new oil cooler gaskets to the oil cooler assembly.
Install the oil cooler assembly to the cylinder block sub-assembly with the 4 bolts.
Connect the No. 1 water by-pass hose and No. 2 water by-pass hose to the oil cooler assembly, and slide the 2 clips to secure them.
2.ADD ENGINE OIL
3.ADD ENGINE COOLANT (for Engine)
4.CHECK ENGINE OIL LEVEL
5.INSPECT FOR OIL LEAK
6.INSPECT FOR COOLANT LEAK (for Engine)
51420
7.INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY
51441
8.INSTALL NO. 1 ENGINE UNDER COVER
53895B
9.INSTALL FRONT FENDER FRONT SPLASH SHIELD RH
53896B
10.INSTALL FRONT FENDER FRONT SPLASH SHIELD LH