Home › Engine / Hybrid System › A25B-FXS (FUEL) › FUEL INJECTOR (for Direct Injection) › from 2019.02
RM3620E _51 Engine / Hybrid System _080118 A25B-FXS FUEL _0391730 FUEL INJECTOR(for Direct Injection) G

A25B-FXS FUEL  FUEL INJECTOR(for Direct Injection)  INSPECTION  


PROCEDURE

Hide 23250E 1.INSPECT DIRECT FUEL INJECTOR ASSEMBLY

NOTICE:

This inspection is for checking the direct fuel injector assembly for an open or short. Because the direct fuel injector assembly of this vehicle is a high-pressure type, fuel injection volume cannot be checked.


a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 1.34 to 1.64 Ω


If the result is not as specified, replace the direct fuel injector assembly.