Home › Engine / Hybrid System › A25B-FXS (FUEL) › FUEL PUMP ECU › from 2019.02
RM3620E _51 Engine / Hybrid System _080118 A25B-FXS FUEL _0391737 FUEL PUMP ECU A

A25B-FXS FUEL  FUEL PUMP ECU  INSTALLATION  


PROCEDURE

Hide 89571 1.INSTALL FUEL PUMP CONTROL ECU

a.

Install the fuel pump control ECU bracket to the fuel pump control ECU with the 2 bolts.

Torque:
4.5 N*m (46 kgf*cm, 40 in.*lbf)


b.

Install the fuel pump control ECU to the body with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


c.

Connect the 2 connectors to the fuel pump control ECU.


Hide 64740E 2.INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

Hide 3.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 65351A 4.INSTALL BATTERY HOLE COVER

Hide 58416K 5.INSTALL REAR NO. 2 FLOOR BOARD

Hide 58410B 6.INSTALL DECK BOARD ASSEMBLY