This DTC is stored when the rain sensor detects an internal malfunction.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Memory | DTC Output from |
|---|---|---|---|---|---|
| B1400 | Rain Sensor Malfunction | Detection Condition:
IG power source voltage is 9.5 V or more Malfunction Status:
Either of the following is detected -
Rain sensor internal thermistor malfunction detected for 10 seconds or more -
LED output malfunction detected for 2 seconds or more |
Rain sensor | ○ | Rain sensor |
Clear the DTCs.
Click hereVehicle Exterior>WIPER / WASHER>WIPER AND WASHER SYSTEM>DTC CHECK / CLEAR
Wait 10 seconds or more.
Check for DTCs.
Click hereVehicle Exterior>WIPER / WASHER>WIPER AND WASHER SYSTEM>DTC CHECK / CLEAR
DTC B1400 is not output
| Proceed to |
|---|
| OK |
| NG |
OK
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
NG