Home › General › SPECIFICATIONS › GF2A TRANSFER / 4WD / AWD › from 2019.09
RM3620E _V1 General _077121 SPECIFICATIONS _0379232 GF2A TRANSFER / 4WD / AWD F

SPECIFICATIONS  GF2A TRANSFER / 4WD / AWD  SERVICE DATA  


Transfer Case Oil Seal
Installation depth for LH Side 9.5 to 10.5 mm (0.375 to 0.413 in.)
for RH Side -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)
for Rear Side 3.9 to 4.9 mm (0.154 to 0.193 in.)

Transfer Assembly
Transfer case straight pin Installation depth 10.8 to 11.8 mm (0.426 to 0.464 in.)

Transfer Oil
Oil grade Standard Capacity

*: Using transfer oil other than the specified oil may cause abnormal noise or vibration, or damage the transfer of your vehicle.

Toyota genuine differential gear oil LX* 0.36 to 0.42 liters (0.381 to 0.443 US qts, 0.317 to 0.369 Imp. qts)