Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › REAR MOTOR GENERATOR CONTROL SYSTEM (for LITHIUM-ION BATTERY) › from 2020.05
RM3620E _51 Engine / Hybrid System _076333 HYBRID / BATTERY CONTROL _0425054 REAR MOTOR GENERATOR CONTROL SYSTEM(for LITHIUM-ION BATTERY) C

HYBRID / BATTERY CONTROL  REAR MOTOR GENERATOR CONTROL SYSTEM(for LITHIUM-ION BATTERY)  P1C2C1C  Drive Motor "B" Control Module AD Converter Circuit Voltage Out of Range  P1C2C49  Drive Motor "B" Control Module AD Converter Circuit Internal Electronic Failure  P1C631F  Drive Motor "B" Control Module Offset Power Circuit Intermittent  P262C1C  Drive Motor "B" Control Module Offset Power Circuit Voltage Out of Range  P310B1F  Communication Error from Drive Motor "A" to Drive Motor "B" Circuit Intermittent  P310B83  Communication Error from Drive Motor "A" to Drive Motor "B" Value of Signal Protection Calculation Incorrect  P310B86  Communication Error from Drive Motor "A" to Drive Motor "B" Signal (Some Circuit Quantity, Reported via Serial Data) Invalid  P310B87  Communication Error from Drive Motor "A" to Drive Motor "B" Missing Message  P32CF1F  Lost Communication between Drive Motor "A" and "B" (Drive Motor "B") Circuit Intermittent  P32CF83  Lost Communication between Drive Motor "A" and "B" (Drive Motor "B") Value of Signal Protection Calculation Incorrect  P32CF86  Lost Communication between Drive Motor "A" and "B" (Drive Motor "B") Signal (Some Circuit Quantity, Reported via Serial Data) Invalid  P32CF87  Lost Communication between Drive Motor "A" and "B" (Drive Motor "B") Missing Message  


DESCRIPTION

The motor generator control ECU, which is built into the inverter with converter assembly, monitors its internal operation and will store DTCs if it detects a malfunction.

If any of the following DTCs are output, replace the inverter with converter assembly.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate
P1C2C1C Drive Motor "B" Control Module AD Converter Circuit Voltage Out of Range Motor generator control ECU internal malfunction
(1 trip detection logic)
Inverter with converter assembly Comes on Master Warning:
Comes on
P1C2C49 Drive Motor "B" Control Module AD Converter Circuit Internal Electronic Failure Motor generator control ECU internal malfunction
(1 trip detection logic)
Inverter with converter assembly Comes on Master Warning:
Comes on
P1C631F Drive Motor "B" Control Module Offset Power Circuit Intermittent Motor generator control ECU internal malfunction detected when DTC P0C7917, P0D3319, P1C5D19, P1C5F19 or P1C5E19 is stored.
(1 trip detection logic)
Inverter with converter assembly Does not come on Master Warning:
Does not come on
P262C1C Drive Motor "B" Control Module Offset Power Circuit Voltage Out of Range Motor generator control ECU internal malfunction
(1 trip detection logic)
Inverter with converter assembly Comes on Master Warning:
Comes on
P310B1F Communication Error from Drive Motor "A" to Drive Motor "B" Circuit Intermittent Communication error (circuit intermittent from motor to rear motor) detected when DTC P0C7917, P0D3319, P1C5D19, P1C5F19 or P1C5E19 is stored.
(1 trip detection logic)
Inverter with converter assembly Does not come on Master Warning:
Does not come on
P310B83 Communication Error from Drive Motor "A" to Drive Motor "B" Value of Signal Protection Calculation Incorrect Motor generator control ECU internal malfunction
(1 trip detection logic)
Inverter with converter assembly Comes on Master Warning:
Comes on
P310B86 Communication Error from Drive Motor "A" to Drive Motor "B" Signal (Some Circuit Quantity, Reported via Serial Data) Invalid Motor generator control ECU internal malfunction
(1 trip detection logic)
Inverter with converter assembly Comes on Master Warning:
Comes on
P310B87 Communication Error from Drive Motor "A" to Drive Motor "B" Missing Message Motor generator control ECU internal malfunction
(1 trip detection logic)
Inverter with converter assembly Comes on Master Warning:
Comes on
P32CF1F Lost Communication between Drive Motor "A" and "B" (Drive Motor "B") Circuit Intermittent Communication error (circuit intermittent from generator to rear motor) detected when DTC P0C7917, P0D3319, P1C5D19, P1C5F19 or P1C5E19 is stored.
(1 trip detection logic)
Inverter with converter assembly Does not come on Master Warning:
Does not come on
P32CF83 Lost Communication between Drive Motor "A" and "B" (Drive Motor "B") Value of Signal Protection Calculation Incorrect Motor generator control ECU internal malfunction
(1 trip detection logic)
Inverter with converter assembly Comes on Master Warning:
Comes on
P32CF86 Lost Communication between Drive Motor "A" and "B" (Drive Motor "B") Signal (Some Circuit Quantity, Reported via Serial Data) Invalid Motor generator control ECU internal malfunction
(1 trip detection logic)
Inverter with converter assembly Comes on Master Warning:
Comes on
P32CF87 Lost Communication between Drive Motor "A" and "B" (Drive Motor "B") Missing Message Motor generator control ECU internal malfunction
(1 trip detection logic)
Inverter with converter assembly Comes on Master Warning:
Comes on

CONFIRMATION DRIVING PATTERN

HINT:

After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>REAR MOTOR GENERATOR CONTROL SYSTEM (for LITHIUM-ION BATTERY)>UTILITY


1.

Connect the GTS to the DLC3.

2.

Turn the power switch on (IG) and turn the GTS on.

3.

Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).

4.

Turn the power switch off and wait for 2 minutes or more.

5.

Turn the power switch on (IG) and turn the GTS on.

6.

With power switch on (IG) and wait for 15 seconds or more.

7.

Enter the following menus: Powertrain / Rear Motor Generator / Utility / All Readiness.

8.

Check the DTC judgment result.

HINT:
·

If the judgment result shows NORMAL, the system is normal.

·

If the judgment result shows ABNORMAL, the system has a malfunction.

·

If the judgment result shows INCOMPLETE, perform driving pattern again.




PROCEDURE

1.GO TO MOTOR GENERATOR CONTROL SYSTEM
a.

Go to Motor Generator Control System.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>MOTOR GENERATOR CONTROL SYSTEM (for 4WD/AWD with LITHIUM-ION BATTERY)>P06B01C

HINT:

For the P1C2C1C, P1C2C49, P1C631F, P262C1C, P310B1F, P310B83, P310B86, P310B87, P32CF1F, P32CF83, P32CF86 and P32CF87 inspection procedures, refer to the Motor Generator Control System section.



Result:
Result
NEXT



NEXT

END