Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID BATTERY SYSTEM (for LITHIUM-ION BATTERY) › from 2020.05
RM3620E _51 Engine / Hybrid System _076333 HYBRID / BATTERY CONTROL _0425055 HYBRID BATTERY SYSTEM(for LITHIUM-ION BATTERY) T

HYBRID / BATTERY CONTROL  HYBRID BATTERY SYSTEM(for LITHIUM-ION BATTERY)  PROBLEM SYMPTOMS TABLE  


Hybrid Battery System
Symptom Suspected Area Link
"Maintenance Required for Traction Battery Cooling Parts See Owner's Manual" is displayed on the multi-information display.* 1. Make sure the HV battery cooling system intake port is not blocked. -
2. Make sure there are no gaps between the connecting parts of the ducts. -
3. Clean the No. 1 HV battery intake filter.
Check for entry of foreign matter.
Click here
4. Clear the DTCs to reset the learning values even if no DTCs are stored. Click here
Abnormal sound is heard from the area around the No. 1 hybrid battery intake duct. 1. Make sure the HV battery cooling system intake port is not blocked. -
2. Make sure there are no gaps between the connecting parts of the ducts. -
3. Clean the No. 1 HV battery intake filter.
Check for entry of foreign matter.
Click here
4. Clear the DTCs to reset the learning values even if no DTCs are stored. Click here
"Have Traction Battery Inspected" is displayed on the multi-information display. "Have Traction Battery Inspected" is displayed. Click here
Power switch does not turn on (READY). Entry and start system (for start function) Click here
ECU power source circuit (Hybrid battery system) Click here
ECU power source circuit (Hybrid control system) for 4WD/AWD:Click here
for 2WD:Click here
Check vehicle control history
(Ready ON Prevention)
Click here
The power switch is slow to turn on (READY). Check vehicle control history
(Ready ON Prevention)
Click here
Engine stops and starts less frequently. Check vehicle control history
(Limit to Charge / Discharge Control Value by Hybrid Battery)
Click here
Engine speed returns to idle slowly after accelerator pedal is fully released. Check vehicle control history
(Limit to Charge / Discharge Control Value by Hybrid Battery)
Click here

*: If the battery cooling blower assembly malfunctions, DTC P0A8100, P0A8111, P0A8115, P0A814B, P0A8196 or P0A8198 will be stored. If only "Maintenance Required for Traction Battery Cooling Parts See Owner's Manual" is displayed on the multi-information display, only perform the inspection of the HV battery cooling system intake port, filter and duct.