Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › MOTOR GENERATOR CONTROL SYSTEM (for 2WD with LITHIUM-ION BATTERY) › from 2020.05
RM3620E _51 Engine / Hybrid System _076333 HYBRID / BATTERY CONTROL _0427173 MOTOR GENERATOR CONTROL SYSTEM(for 2WD with LITHIUM-ION BATTERY) U

HYBRID / BATTERY CONTROL  MOTOR GENERATOR CONTROL SYSTEM(for 2WD with LITHIUM-ION BATTERY)  TERMINALS OF ECU  



A365592C59
1,1.792 1.406,2.021 0.406,0.229 2.344,1.802 2.75,2.031 0.406,0.229 1.104,1.833 1.563,2.031 0.458,0.198 10 false A51 2.417,1.844 2.875,2.042 0.458,0.198 10 false C49 0.104,0.104 0.417,0.302 0.313,0.198 10 false *1
*1 Inverter with Converter Assembly


HINT:

Since the inverter with converter assembly uses waterproof connectors, the voltage and waveforms cannot be inspected directly. Standard voltage readings and waveforms are indicated for reference only.


Inverter with Converter Assembly
Terminal No.
(Symbol)
Wiring Color Input/Output Terminal Description Condition Standard Condition
A51-1 (CANH) - A51-24 (GND1) V - W-B Input/Output CAN communication signal Power switch on (IG) Pulse generation
(Waveform 1)
A51-5 (+B2) - A51-24 (GND1) GR - W-B Input Motor generator control ECU (MG ECU) power source Power switch on (IG) 11 to 14 V
A51-6 (+B) - A51-24 (GND1) W - W-B Input Motor generator control ECU (MG ECU) power source Power switch on (IG) 11 to 14 V
A51-7 (CANL) - A51-24 (GND1) W - W-B Input/Output CAN communication signal Power switch on (IG) Pulse generation
(Waveform 1)
A51-10 (GI) - A51-24 (GND1) R - W-B Input Camshaft position sensor signal Power switch on (READY), engine running Pulse generation
(Waveform 2)
A51-12 (IGCT) - A51-24 (GND1) BE - W-B Input Motor generator control ECU (MG ECU) power source Power switch on (IG) 11 to 14 V
A51-17 (NE) - A51-24 (GND1) B - W-B Input Crankshaft position sensor signal Power switch on (READY), engine running Pulse generation
(Waveform 3)
A51-19 (HMCL) - A51-24 (GND1) W - W-B Input/Output Communication signal Power switch on (IG) Pulse generation
(Waveform 4)
A51-20 (HMCH) - A51-24 (GND1) B - W-B Input/Output Communication signal Power switch on (IG) Pulse generation
(Waveform 4)
A51-22 (HSDN) - A51-24 (GND1) G - W-B Input MG shutdown signal Power switch on (READY) 0 to 1 V
C49-1 (MSN) - C49-2 (MSNG) G - Y Input Motor resolver signal Motor resolver running Pulse generation
(Waveform 5)
C49-3 (MCSG) - C49-4 (MCS) B - L Input Motor resolver signal Motor resolver running Pulse generation
(Waveform 5)
C49-5 (MRF) - C49-6 (MRFG) W - R Output Motor resolver reference signal Motor resolver running Pulse generation
(Waveform 5)
C49-8 (GRF) - C49-9 (GRFG) SB - V Output Generator resolver reference signal Generator resolver running Pulse generation
(Waveform 6)
C49-10 (GSN) - C49-11 (GSNG) GR - P Input Generator resolver signal Generator resolver running Pulse generation
(Waveform 6)
C49-12 (GCSG) - C49-13 (GCS) BR - LG Input Generator resolver signal Generator resolver running Pulse generation
(Waveform 6)

NOTICE:

Do not measure the voltage or waveform on the sealed side of the inverter with converter assembly connector. Doing so may damage the connector because the connector is waterproof.


Oscilloscope waveforms


HINT:

Oscilloscope waveforms shown in the illustrations are examples for reference only. Noise, chattering, etc. are not shown.


a.
A284438E05
2.969,1.198 3.427,1.396 0.458,0.198 10 GND 2.969,1.573 3.427,1.771 0.458,0.198 10 GND 0.396,0.646 0.854,0.844 0.458,0.198 10 CH1 0.396,1.229 0.854,1.427 0.458,0.198 10 CH2

Waveform 1 (CAN communication signal)

Item Content
Terminal CH1: A51-1 (CANH) - A51-24 (GND1)
CH2: A51-7 (CANL) - A51-24 (GND1)
Equipment Setting 1 V/DIV., 50 μs./DIV.
Condition Power switch on (IG)


b.
A217984E06
2.802,1.167 3.146,1.344 0.344,0.177 10 GND

Waveform 2 (camshaft position sensor signal)

Item Content
Terminal A51-10 (GI) - A51-24 (GND1)
Equipment Setting 5 V/DIV., 20 ms./DIV.
Condition Power switch on (READY), engine running

HINT:

The wavelength becomes shorter as the engine speed increases.



c.
A217984E06
2.802,1.167 3.146,1.344 0.344,0.177 10 GND

Waveform 3 (crankshaft position sensor signal)

Item Content
Terminal A51-17 (NE) - A51-24 (GND1)
Equipment Setting 5 V/DIV., 20 ms./DIV.
Condition Power switch on (READY), engine running

HINT:

The wavelength becomes shorter as the engine speed increases.



d.
A284438E05
2.969,1.198 3.427,1.396 0.458,0.198 10 GND 2.969,1.573 3.427,1.771 0.458,0.198 10 GND 0.396,0.646 0.854,0.844 0.458,0.198 10 CH1 0.396,1.229 0.854,1.427 0.458,0.198 10 CH2

Waveform 4 (communication signal)

Item Content
Terminal CH1: A51-19 (HMCL) - A51-24 (GND1)
CH2: A51-20 (HMCH) - A51-24 (GND1)
Equipment Setting 1 V/DIV., 50 μs./DIV.
Condition Power switch on (IG)

HINT:

The waveform will vary depending on the content of the digital communication (digital signal).



e.
A373584E01
0.333,0.667 0.792,0.865 0.458,0.198 10 false CH1 0.333,1.104 0.792,1.302 0.458,0.198 10 false CH2 0.333,1.406 0.792,1.604 0.458,0.198 10 false CH3 1.208,1.667 1.365,1.865 0.156,0.198 10 false A

Waveform 5 (motor resolver signal)

Item Content
Terminal CH1: C49-5 (MRF) - C49-6 (MRFG)
CH2: C49-1 (MSN) - C49-2 (MSNG)
CH3: C49-4 (MCS) - C49-3 (MCSG)
Equipment Setting CH1: 10 V/DIV., 1 ms./DIV.
CH2: 5 V/DIV., 1 ms./DIV.
CH3: 5 V/DIV., 1 ms./DIV.
Condition Motor resolver running

HINT:

The width indicated by (A) becomes shorter as the rotor speed increases.



f.
A373584E01
0.333,0.667 0.792,0.865 0.458,0.198 10 false CH1 0.333,1.104 0.792,1.302 0.458,0.198 10 false CH2 0.333,1.406 0.792,1.604 0.458,0.198 10 false CH3 1.208,1.667 1.365,1.865 0.156,0.198 10 false A

Waveform 6 (generator resolver signal)

Item Content
Terminal CH1: C49-8 (GRF) - C49-9 (GRFG)
CH2: C49-10 (GSN) - C49-11 (GSNG)
CH3: C49-13 (GCS) - C49-12 (GCSG)
Equipment Setting CH1: 10 V/DIV., 1 ms./DIV.
CH2: 5 V/DIV., 1 ms./DIV.
CH3: 5 V/DIV., 1 ms./DIV.
Condition Generator resolver running

HINT:

The width indicated by (A) becomes shorter as the rotor speed increases.