Home › Engine / Hybrid System › M20A-FKS (ENGINE CONTROL) › CAMSHAFT OIL CONTROL VALVE › from 2020.05
RM3620E _51 Engine / Hybrid System _076384 M20A-FKS ENGINE CONTROL _0372627 CAMSHAFT OIL CONTROL VALVE A

M20A-FKS ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 135A0A 1.INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (EXHAUST CAMSHAFT TIMING GEAR BOLT ASSEMBLY)

a.

Temporarily install the camshaft timing oil control valve assembly (exhaust camshaft timing gear bolt assembly) to the camshaft timing exhaust gear assembly.

NOTICE:

If the camshaft timing oil control valve assembly (exhaust camshaft timing gear bolt assembly) has been struck or dropped, replace it.



b.

Using a 5 mm hexagon socket wrench, install the camshaft timing oil control valve assembly (exhaust camshaft timing gear bolt assembly) with the bolt.

Torque:
19 N*m (194 kgf*cm, 14 ft.*lbf)


Hide 15370 2.INSTALL CAM TIMING OIL CONTROL SOLENOID ASSEMBLY