Home › Audio / Visual / Telematics › TELEMATICS › TELEMATICS SYSTEM (for eCall) › from 2020.08
RM3620E _56 Audio / Visual / Telematics _076049 TELEMATICS _0372098 TELEMATICS SYSTEM(for eCall) J

TELEMATICS  TELEMATICS SYSTEM(for eCall)  Alarm Notification Function Malfunction  


PROCEDURE

1.CHECK SETTINGS
a.

Check that the alarm notification function is not set to on.

Result:
Result Proceed to
The alarm notification function is not set to on. A
The alarm notification function is set to on. B




A

2.CHECK FOR SERVICE FLAG

B

CHANGE SETTINGS

2.CHECK FOR SERVICE FLAG
a.

Check for service flag.

i.

Connect the GTS to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the GTS on.


iv.

Enter the following menus: Body Electrical / Telematics / Data List.


v.

According to the display on the GTS, read the "Data List".

Body Electrical > Telematics > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Alarm Notification Display "Alarm Notification" function enabled/disabled status Not Avail or Available NOT Avail: alarm notification function disabled
Available: alarm notification function enabled
-

vi.

Check if the flag information indicates "Available" as shown in the illustration.

Result:
Result Proceed to
"Available" is indicated. A
"Not Avail" is indicated. B





A

3.CHECK THEFT DETERRENT SYSTEM

B

CONTACT SERVICE CENTER

3.CHECK THEFT DETERRENT SYSTEM
a.

Check if the theft deterrent system is operating and functioning normally.

OK:

The theft deterrent system is normal.



Result:
Proceed to
OK
NG



OK

4.CHECK CELLULAR PHONE

NG

4.CHECK CELLULAR PHONE
a.

Ask the customer to check that the reception of the cellular phone is normal.


b.

Ask the customer to check that the call and e-mail functions of the cellular phone operate properly.

OK:

The cellular phone is normal.



Result:
Proceed to
OK
NG



OK

5.CHECK SETTINGS

NG

REPAIR OR REPLACE CELLULAR PHONE

5.CHECK SETTINGS
a.

Ask the customer to check that the incoming e-mail/call restriction is not set to on.


Result:
Result Proceed to
Incoming e-mail/call restriction is not set to on. A
Incoming e-mail/call restriction is set to on. B



A

CONTACT SERVICE CENTER

B

CHANGE CELLULAR PHONE SETTINGS