Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM (w/o Occupant Classification System) › from 2020.08
RM3620E _58 Vehicle Interior _076036 SUPPLEMENTAL RESTRAINT SYSTEMS _0378287 AIRBAG SYSTEM(w/o Occupant Classification System) C

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG SYSTEM(w/o Occupant Classification System)  B166C  Front Door Pressure Sensor RH  B166F  Front Door Pressure Sensor Threshold Malfunction (RH)  


DESCRIPTION

The side collision sensor RH circuit consists of the airbag sensor assembly, side airbag pressure sensor RH and No. 2 side airbag sensor assembly RH*.

The side airbag pressure sensor RH detects impacts to the vehicle and sends signals to the airbag sensor assembly to determine if the SRS should be deployed.

These DTCs are stored when a malfunction is detected in the side airbag pressure sensor RH or airbag sensor assembly.

*: w/ Rear Airbag Sensor


DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Test Mode / Check Mode
B166C Front Door Pressure Sensor RH Either condition is met:
·

A side airbag pressure sensor RH malfunction.

·

An airbag sensor assembly malfunction.


·

Side airbag pressure sensor RH

·

Airbag sensor assembly


Comes on Not applicable
B166F Front Door Pressure Sensor Threshold Malfunction (RH) Either condition is met:
·

A side airbag pressure sensor RH malfunction.

·

An airbag sensor assembly malfunction.


·

Side airbag pressure sensor RH

·

Airbag sensor assembly


Comes on Not applicable

WIRING DIAGRAM

w/ Rear Airbag Sensor:
C401868E33
5.375,2.083 7.115,2.552 1.74,0.469 10 false Airbag Sensor Assembly 5.375,1.927 6.208,2.125 0.833,0.198 10 false M15 5.677,0.875 6.51,1.073 0.833,0.198 10 false BBR+ 5.698,1.458 6.531,1.656 0.833,0.198 10 false BBR- 5.406,0.76 6.24,0.958 0.833,0.198 10 false 25 5.406,1.365 6.24,1.563 0.833,0.198 10 false 26 1.615,0.75 2.448,0.948 0.833,0.198 10 false 4 1.635,1.313 2.469,1.51 0.833,0.198 10 false 3 1.146,0.854 1.979,1.052 0.833,0.198 10 false BCR+ 1.104,1.469 1.938,1.667 0.833,0.198 10 false BCR- 1.135,2.792 1.969,2.99 0.833,0.198 10 false BDR+ 1.146,3.333 1.979,3.531 0.833,0.198 10 false BDR- 1.604,2.688 2.438,2.885 0.833,0.198 10 false 1 1.594,3.24 2.427,3.438 0.833,0.198 10 false 2 4.083,2.813 4.917,3.01 0.833,0.198 10 false BDR+ 4.094,3.354 4.927,3.552 0.833,0.198 10 false BDR- 0.552,3.969 2.177,4.344 1.625,0.375 10 false No. 2 Side Airbag Sensor Assembly RH 0.552,3.813 1.313,4.146 0.76,0.333 10 false M16 4.031,3.99 6.25,4.24 2.219,0.25 10 false Side Airbag Pressure Sensor RH 4.021,3.823 4.781,4.156 0.76,0.333 10 false I10 2.698,3.344 3.458,3.677 0.76,0.333 10 false IM2 2.708,2.813 3.469,3.146 0.76,0.333 10 false IM2 2.781,3.167 3.615,3.365 0.833,0.198 10 false 2 2.781,2.594 3.615,2.792 0.833,0.198 10 false 1 2.667,2.99 3.5,3.188 0.833,0.198 10 false BDR+ 2.708,3.552 3.542,3.75 0.833,0.198 10 false BDR- 3.906,2.708 4.74,2.906 0.833,0.198 10 false 2 3.906,3.219 4.74,3.417 0.833,0.198 10 false 1

w/o Rear Airbag Sensor:
E444927E02
5.344,1.958 5.802,2.156 0.458,0.198 10 false M15 5.333,2.135 7.042,2.354 1.708,0.219 10 false Airbag Sensor Assembly 5.552,0.75 6.01,0.948 0.458,0.198 10 false BBR+ 5.552,1.375 6.01,1.573 0.458,0.198 10 false BBR- 5.271,0.646 5.552,0.844 0.281,0.198 10 false 25 5.271,1.25 5.552,1.448 0.281,0.198 10 false 26 3.458,0.771 3.74,0.969 0.281,0.198 10 false IM2 3.469,1.385 3.75,1.583 0.281,0.198 10 false IM2 3.51,0.573 3.792,0.771 0.281,0.198 10 false 1 3.521,1.177 3.802,1.375 0.281,0.198 10 false 2 3.417,0.979 3.875,1.177 0.458,0.198 10 false BDR+ 3.427,1.594 3.885,1.792 0.458,0.198 10 false BDR- 1.625,0.635 1.906,0.833 0.281,0.198 10 false 2 1.625,1.25 1.906,1.448 0.281,0.198 10 false 1 1.146,0.771 1.604,0.969 0.458,0.198 10 false BDR+ 1.135,1.406 1.594,1.604 0.458,0.198 10 false BDR- 0.125,1.781 0.583,1.979 0.458,0.198 10 false I10 0.115,1.958 2.333,2.25 2.219,0.292 10 false Side Airbag Pressure Sensor RH

CAUTION / NOTICE / HINT

NOTICE:
·

When disconnecting the cable from the negative (-) auxiliary battery terminal while performing repairs, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION

·

After replacing the airbag sensor assembly, refer to initialization.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION



PROCEDURE

1.CHECK VEHICLE TYPE
Result:
Proceed to
w/ Rear Airbag Sensor
w/o Rear Airbag Sensor



w/ Rear Airbag Sensor

2.CHECK SIDE AIRBAG PRESSURE SENSOR RH

w/o Rear Airbag Sensor

3.CHECK SIDE AIRBAG PRESSURE SENSOR RH
2.CHECK SIDE AIRBAG PRESSURE SENSOR RH
a.
C238395C21
0.719,1.531 1.51,2.167 0.792,0.635 10 false *1 2.573,1.51 2.927,1.917 0.354,0.406 10 false *2
*1 Side Airbag Pressure Sensor LH
*2 No. 2 Side Airbag Sensor Assembly RH


Turn the ignition switch off.


b.

Disconnect the cable from the negative (-) auxiliary battery terminal, and wait for at least 90 seconds.


c.

Interchange the side airbag pressure sensor RH with LH and connect the connectors to them.


d.

Connect the cable to the negative (-) auxiliary battery terminal, and wait for at least 2 seconds.


e.

Turn the ignition switch to ON, and wait for at least 60 seconds.


f.

Clear the DTCs stored in memory.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (w/o Occupant Classification System)>DTC CHECK / CLEAR

Body Electrical > SRS Airbag > Clear DTCs
50002 188

g.

Turn the ignition switch off.


h.

Turn the ignition switch to ON, and wait for at least 60 seconds.


i.

Check for DTCs.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (w/o Occupant Classification System)>DTC CHECK / CLEAR

Body Electrical > SRS Airbag > Trouble Codes
50001 188
Result:
Proceed to
DTC B166C or B166F is output
DTC B167A or B167E is output
DTCs B166C, B166F, B167A and B167E are not output


HINT:

Codes other than DTCs B166C, B166F, B167A and B167E may be output at this time, but they are not related to this check.



j.

Turn the ignition switch off.


k.

Disconnect the cable from the negative (-) auxiliary battery terminal, and wait for at least 90 seconds.


l.

Return the side airbag pressure sensor LH and RH to their original positions and connect the connectors to them.



DTC B166C or B166F is output

DTC B167A or B167E is output

DTCs B166C, B166F, B167A and B167E are not output

3.CHECK SIDE AIRBAG PRESSURE SENSOR RH
a.
E444928C01
0.719,1.531 1.51,2.167 0.792,0.635 10 false *1 2.573,1.51 2.927,1.917 0.354,0.406 10 false *2
*1 Side Airbag Pressure Sensor LH
*2 Airbag Sensor Assembly


Turn the ignition switch off.


b.

Disconnect the cable from the negative (-) auxiliary battery terminal, and wait for at least 90 seconds.


c.

Interchange the side airbag pressure sensor RH with LH and connect the connectors to them.


d.

Connect the cable to the negative (-) auxiliary battery terminal, and wait for at least 2 seconds.


e.

Turn the ignition switch to ON, and wait for at least 60 seconds.


f.

Clear the DTCs stored in memory.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (w/o Occupant Classification System)>DTC CHECK / CLEAR

Body Electrical > SRS Airbag > Clear DTCs
50002 188

g.

Turn the ignition switch off.


h.

Turn the ignition switch to ON, and wait for at least 60 seconds.


i.

Check for DTCs.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM (w/o Occupant Classification System)>DTC CHECK / CLEAR

Body Electrical > SRS Airbag > Trouble Codes
50001 188
Result:
Proceed to
DTC B166C or B166F is output
DTC B167A or B167E is output
DTCs B166C, B166F, B167A and B167E are not output


HINT:

Codes other than DTCs B166C, B166F, B167A and B167E may be output at this time, but they are not related to this check.



j.

Turn the ignition switch off.


k.

Disconnect the cable from the negative (-) auxiliary battery terminal, and wait for at least 90 seconds.


l.

Return the side airbag pressure sensor LH and RH to their original positions and connect the connectors to them.



DTC B166C or B166F is output

DTC B167A or B167E is output

DTCs B166C, B166F, B167A and B167E are not output