Home › General › MAINTENANCE › A25A-FXS AUXILIARY BATTERY › from 2020.08
RM3620E _V1 General _076298 MAINTENANCE _0372243 A25A-FXS AUXILIARY BATTERY A

MAINTENANCE  A25A-FXS AUXILIARY BATTERY  INSTALLATION  


PROCEDURE

Hide 1.INSTALL AUXILIARY BATTERY

a.

w/ No. 1 Battery Spacer:

Install the No. 1 battery spacer.


b.

Install the auxiliary battery.


c.

Install the battery clamp sub-assembly with the bolt and nut.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


d.

Connect the battery hose to the auxiliary battery.


e.

Connect the cable to the positive (+) auxiliary battery terminal and tighten the nut.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


f.

Close the connector cover.


Hide 2.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

a.

Connect the cable to the negative (-) auxiliary battery terminal and tighten the nut.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION



Hide 65351A 3.INSTALL BATTERY HOLE COVER

a.

Attach the 12 claws and install the battery hole cover.


Hide 58416K 4.INSTALL REAR NO. 2 FLOOR BOARD

a.

Attach the 2 clips and 2 guides and install the rear No. 2 floor board.


Hide 58410B 5.INSTALL DECK BOARD ASSEMBLY

a.

Install the deck board assembly.