Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM › from 2020.08
RM3620E _59 Vehicle Exterior _077130 LIGHTING (EXT) _0375584 LIGHTING SYSTEM D

LIGHTING (EXT)  LIGHTING SYSTEM  OPERATION CHECK  


AUTOMATIC LIGHT CONTROL SYSTEM OPERATION CHECK


NOTICE:

Make sure that the customize settings are set to default when performing the automatic light control system operation check.

Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>CUSTOMIZE PARAMETERS


a.

Turn the ignition switch to ON.


b.

Turn the light control switch to the AUTO position.


c.

Cover the automatic light control sensor.


d.

Check that the taillights and low beam headlights come on.


e.

Uncover the automatic light control sensor.


f.

Check that the low beam headlights and taillights turn off.



LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK (except Driver Door-linked Auto Light Turn-off System)


a.

When the light control switch is in the TAIL or HEAD position

i.

Turn the ignition switch to ON.


ii.

Turn the low beam headlights or high beam headlights on.


iii.

Turn the ignition switch off.


iv.

Check that the low beam headlights and high beam headlights turn off immediately.

HINT:

The taillights and rear fog lights* remain on.

*: w/ Rear Fog Light




b.

When the light control switch is in the AUTO position

i.

Turn the ignition switch to ON.


ii.

Turn the taillights, low beam headlights, high beam headlights, front fog lights*1 or rear fog lights*2 on.

*1: w/ Front Fog Light

*2: w/ Rear Fog Light



iii.

Turn the ignition switch off.


iv.

Check that all of the lights turn off immediately.




LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK (for Driver Door-linked Auto Light Turn-off System)


a.

Close all of the doors.


b.

Turn the ignition switch to ON.


c.

Turn the taillights, low beam headlights, high beam headlights, front fog lights*1 and rear fog lights*2 on.

*1: w/ Front Fog Light

*2: w/ Rear Fog Light



d.

Turn the ignition switch off.


e.

Open the driver door.


f.

Check that all of the lights turn off immediately.



LIGHT AUTO TURN-OFF SYSTEM OPERATION CHECK (w/ Delay Function)


NOTICE:

Vehicles displaying the Item "Light Auto OFF Delay" on the GTS:

This check is possible only when the "Light Auto OFF Delay" customize setting is set to "ON" on the GTS.

Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>CUSTOMIZE PARAMETERS


a.

When the taillights are on (low beam headlights are not on)

i.

Close all of the doors.


ii.

Turn the ignition switch to ON.


iii.

Turn the taillights on.


iv.

Turn the ignition switch off.


v.

Open the driver door.


vi.

Check that all of the lights turn off immediately.



b.

When the low beam headlights are on

i.

Close all of the doors.


ii.

Turn the ignition switch to ON.


iii.

Turn the low beam headlights on.


iv.

Turn the ignition switch off.


v.

Open any of the doors.


vi.

Close the door.


vii.

Check that all of the lights turn off after 30 seconds (delay function).

HINT:

Before the lights turn off, if the lock button on the key is pushed after all of the doors are locked, all of the lights will turn off immediately.





DAYTIME RUNNING LIGHT SYSTEM OPERATION CHECK


*1: for HV Model

*2: for Gasoline Model

*3: w/ Light Control Switch OFF Position


a.

Start the hybrid control system*1 or engine*2.


b.

Turn the light control switch to the OFF*3 or AUTO position (with the low beam headlights not turned on via the automatic light control system).


c.

Release the parking brake.


d.

Check that the daytime running lights come on.



DOOR MIRROR FOOT LIGHT CONTROL OPERATION CHECK (w/ Foot Light)


a.

The operation and condition of this control are described below.

Operation Condition
Fade in and illuminate constantly When any of the following conditions is met, the lights fade in and illuminate constantly:
·

A key is detected in the actuation area.*1

·

Any door is unlocked when the ignition switch is off and all of the doors are closed.


Illuminate for 15 seconds, and then fade out When any of the following conditions is met, the lights illuminate for 15 seconds, and then fade out:
·

An actuation area-linked function is used.*1, *2

·

Any door is unlocked when the ignition switch is off and all of the doors are closed.


Fade out immediately When the following condition is met, the lights fade out immediately:
·

The ignition switch is turned from off to ON.

·

A key is not detected in the actuation area.*1

·

All doors are locked when all doors are closed and any door is unlocked.



*1: w/ Entry Function


HINT:

*2: When the lights are on, the lights fade out after approximately 3 seconds the key leaves the actuation areas around the doors.




EXTENDED HEADLIGHT LIGHTING OPERATION CHECK (w/ Extended Headlight Lighting)


a.

Turn the ignition switch off.


b.

Turn the light control switch to the AUTO position.


c.

Pull and release the dimmer switch to flash the headlights once.


d.

Check that the low beam headlights come on for approximately 30 seconds.