Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC HIGH BEAM SYSTEM › from 2020.08
RM3620E _59 Vehicle Exterior _077130 LIGHTING (EXT) _0474531 AUTOMATIC HIGH BEAM SYSTEM D

LIGHTING (EXT)  AUTOMATIC HIGH BEAM SYSTEM  FREEZE FRAME DATA  


FREEZE FRAME DATA


a.

Whenever an automatic high beam system DTC is stored, the headlight ECU sub-assembly stores the current vehicle state as freeze frame data.



CHECK FREEZE FRAME DATA


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus:

i.

Body Electrical / Front Recognition Camera (Front Lighting Control) / Trouble Codes.

Body Electrical > Front Recognition Camera (Front Lighting Control) > Trouble Codes
50001 433


e.

Select a DTC to display its freeze frame data.

Body Electrical > Front Recognition Camera (Front Lighting Control)
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Total Distance Traveled Actual driving distance 0 to 16777215 Roughly the same as the actual driving distance -
Total Distance Traveled - Unit Actual driving distance unit km or mile Displays the current actual driving distance unit -
AHB/AHS Information Lighting system state unknown, AHB or AHS Displays lighting system state -


CLEAR FREEZE FRAME DATA


NOTICE:

Clearing the DTCs will also clear the freeze frame data.


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Clear the DTCs and freeze frame data.


d.

Enter the following menus:

i.

Body Electrical / Front Recognition Camera (Front Lighting Control) / Clear DTCs.

Body Electrical > Front Recognition Camera (Front Lighting Control) > Clear DTCs
50002 433