87834
1.REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/o Pre-collision System)
|
Place finger here |
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Place your fingers at the position shown in the illustration and detach the guide in the removal direction (1).
Slide the inner rear view mirror stay holder cover in the removal direction (2) and detach the claw.
Detach the claw and remove the inner rear view mirror stay holder cover.
86466E
2.REMOVE NO. 2 FORWARD RECOGNITION COVER (w/ Pre-collision System)
86466D
3.REMOVE NO. 1 FORWARD RECOGNITION COVER (w/ Pre-collision System)
87810
4.REMOVE INNER REAR VIEW MIRROR ASSEMBLY
w/o Pre-collision System:
Disconnect the connector.
Using a T20 "TORX" socket wrench, remove the "TORX" screw.
|
Remove in this Direction |
Slide the inner rear view mirror assembly as shown in the illustration to remove it.
w/ Pre-collision System:
Disconnect the connector.
Detach the clamp.
Using a T20 "TORX" socket wrench, remove the "TORX" screw.
|
Remove in this Direction |
Slide the inner rear view mirror assembly as shown in the illustration to remove it.