Home › Audio/Visual/Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM

NAVIGATION SYSTEM > Voice Guidance does not Function

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK NAVIGATION SYSTEM SETTING


    E120104E04
  1. Enter the "Menu" screen by pressing the "MENU" switch.

  1. Select "Volume".



    E120106
  1. Check that "OFF" is not selected.

    OK:
    OFF is not selected.



NG
TURN VOICE GUIDANCE VOLUME UP TO 4 USING VOICE ADJUSTMENT SWITCHES
OK


2.CHECK NAVIGATION SETTING


    E120104E05
  1. Enter the "Menu" screen by pressing the "MENU" switch.

  1. Select "Setup".



    E120105E01
  1. Check that "Voice Guidance in All Modes" is not OFF.

    OK:
    "Voice Guidance in All Modes" is not OFF.



NG
TURN VOICE GUIDANCE IN ALL MODES "ON"
OK


3.CHECK NAVIGATION SETTING


    E120104E06
  1. Enter the "Menu" screen by pressing the "MENU" switch.

  1. Select "Setup".



    E120107
  1. Check that "Auto Voice Guidance" is not OFF.

    OK:
    "Auto Voice Guidance" is not OFF.



NG
TURN AUTO VOICE GUIDANCE "ON"
OK


4.CHECK MAP DISC


    I100152
  1. Check that the map disc is not deformed or cracked.

    OK:
    No deformations or cracks on map disc.



NG
REPLACE MAP DISC
OK


5.CHECK NAVIGATION RECEIVER ASSEMBLY
  1. Check that audio can be heard from the speakers.

    OK:
    Audio can be heard.



NG
PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)