Home › Engine / Hybrid System ยท 3UR-FE › ENGINE CONTROL › SFI SYSTEM

SFI SYSTEM > PRECAUTION

for Preparation Click here


CAUTION:
When using the Techstream, observe the following items for safety reasons:
  1. Read its instruction books before using the Techstream.
  2. Prevent the Techstream cable from being caught on the pedals, shift lever and steering wheel when driving with the Techstream connected to the vehicle.
  3. When driving the vehicle for testing purposes using the Techstream, 2 persons are required. One person drives the vehicle, and the other operates the Techstream.

NOTICE:
  1. Perform initialization (throttle position) after replacing the throttle body assembly or cleaning any throttle body components .
  2. Perform initialization (throttle position) after reconnecting the battery cable or replacing the ECM .
  3. Perform Dynamic Laser Cruise Control System initialization after replacing the ECM (Click here).
  4. Perform Reset Memory (AT initialization) for 2WD when replacing the automatic transmission assembly, engine assembly or ECM (Click here).
  5. Perform Reset Memory (AT initialization) for 4WD when replacing the automatic transmission assembly, engine assembly or ECM (Click here).
  6. Perform Registration (VIN registration) when replacing the ECM (Click here).

HINT:
Reset Memory cannot be completed by only removing the battery.