Home › Engine / Hybrid System ยท 3UR-FBE › FUEL › FUEL INJECTOR

FUEL INJECTOR > REMOVAL

for Preparation Click here


CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (Click here).



1. DISCHARGE FUEL SYSTEM PRESSURE
  1. Discharge the fuel system pressure (Click here).



2. REMOVE V-BANK COVER


A165576E03
  1. Raise the front of the V-bank cover to detach the 2 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.



3. REMOVE AIR CLEANER HOSE ASSEMBLY


A187008
  1. Disconnect the vacuum hose and ventilation hose.

  1. Loosen the 2 clamps.

  1. Remove the air cleaner hose.



4. DISCONNECT NO. 2 FUEL TUBE SUB-ASSEMBLY


    A161418
  1. Disconnect the No. 2 fuel tube from the fuel pressure regulator (Click here).



5. DISCONNECT FUEL TUBE SUB-ASSEMBLY


    A161417
  1. Disconnect the fuel tube from the fuel delivery pipe (Click here).



    A161415
  1. Disconnect the fuel tube from the No. 2 fuel delivery pipe (Click here).



6. DISCONNECT NO. 1 FUEL PIPE SUB-ASSEMBLY


    A161416
  1. Disconnect the No. 1 fuel pipe from the No. 2 fuel delivery pipe (Click here).



7. DISCONNECT NO. 3 VENTILATION HOSE


    A198623
  1. Disconnect the No. 3 ventilation hose and No. 6 wire harness connector.



8. REMOVE NO. 3 ENGINE COVER


A191558
  1. Remove the No. 3 engine cover.



9. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY


    A194616
  1. Remove the 2 bolts and fuel delivery pipe.

    NOTICE:
    When removing the delivery pipe, hold the pipe by both ends and pull it straight upward.

  1. Remove the 2 spacers and 4 insulators from the cylinder head RH.



10. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY


A191557
  1. Remove the No. 1 engine cover sub-assembly.



11. REMOVE NO. 2 FUEL DELIVERY PIPE SUB-ASSEMBLY


    A194617
  1. Disconnect the No. 7 wire harness connector.

  1. Remove the 2 bolts and No. 2 fuel delivery pipe.

    NOTICE:
    When removing the delivery pipe, hold the pipe by both ends and pull it straight upward.

  1. Remove the 2 spacers and 4 insulators from the cylinder head LH.



12. REMOVE FUEL INJECTOR ASSEMBLY


    A161427
  1. Remove the fuel injector from the fuel delivery pipe, and then disconnect the injector connector.

    NOTICE:
    A149189E01
    For reinstallation, attach a tag or label to the injector shaft.



    A149190E01
  1. Remove the O-ring from the fuel injector.