YAW RATE AND DECELERATION SENSOR > REMOVAL |
| 1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Twist the shift lever knob in the direction indicated by the arrow and remove it.
| 2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Disengage the 12 clips and remove the console panel.
| 3. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Move the shift lever to N.
Remove the clip.
Disengage the 6 clips and remove the console panel.
Disconnect the connector
| 4. REMOVE REAR CONSOLE BOX POCKET |
![]() |
Remove the rear console box pocket.
| 5. REMOVE CONSOLE BOX CARPET |
![]() |
Remove the console box carpet.
| 6. REMOVE REAR CONSOLE BOX ASSEMBLY |
![]() |
Disconnect the connectors.
![]() |
Remove the 4 bolts and 2 screws.
Disengage the 6 claws and remove the rear console box.
| 7. REMOVE YAW RATE SENSOR |
Remove the 2 nuts (labeled A) and sensor.
Disconnect the sensor connector (labeled B), and then detach the clamp (labeled C) from the sensor bracket.
