SEAT BELT WARNING SYSTEM > CUSTOMIZE PARAMETERS |
| CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE) |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Customize Setting / Warning.
Select the setting by referring to the table below.
| Display (Item) | Default | Content | Setting |
| Driver Side Seatbelt Warning Buzzer | ON | Seat belt warning buzzer ON/OFF setting | ON: Driver buzzer ON OFF: Driver buzzer OFF |
| Front Passenger Side Seatbelt Warning Buzzer | ON | Seat belt warning buzzer ON/OFF setting | ON: Passenger buzzer ON OFF: Passenger buzzer OFF |