Terminal No. (Symbol)
| Wiring Color
| Terminal Description
| Condition
| Specified Condition
|
D56-120 (NSW) - D56-81 (E1)
| L - BR
| PNP switch signal
| - Ignition switch ON
- Shift lever in P or N
| Below 1 V
|
- Ignition switch ON
- Shift lever not in P or N
| 11 to 14 V
|
D56-2 (P) - D56-81 (E1)
| G-B - BR
| P shift position switch signal
| - Ignition switch ON
- Shift lever in P
| 11 to 14 V
|
- Ignition switch ON
- Shift lever not in P
| Below 1 V
|
D56-26 (R) - D56-81 (E1)
| L-R - BR
| R shift position switch signal
| - Ignition switch ON
- Shift lever in R
| 11 to 14 V
|
- Ignition switch ON
- Shift lever not in R
| Below 1 V
|
D56-25 (N) - D56-81 (E1)
| G-W - BR
| N shift position switch signal
| - Ignition switch ON
- Shift lever in N
| 11 to 14 V
|
- Ignition switch ON
- Shift lever not in N
| Below 1 V
|
D56-27 (D) - D56-81 (E1)
| G - BR
| D shift position switch signal
| - Ignition switch ON
- Shift lever in D
| 11 to 14 V
|
- Ignition switch ON
- Shift lever not in D
| Below 1 V
|
A27-25 (S) - D56-81 (E1)
| Y - BR
| S shift position switch signal
| - Ignition switch ON
- Shift lever in S
| 11 to 14 V
|
- Ignition switch ON
- Shift lever not in S
| Below 1 V
|
A27-38 (SFTU) - D56-81 (E1)
| G - BR
| Up-shift shift position switch signal
| - Ignition switch ON
- Shift lever in S
| 11 to 14 V
|
- Ignition switch ON
- Shift lever "+" position (up-shift)
| Below 1 V
|
A27-27 (SFTD) - D56-81 (E1)
| BE - BR
| Down-shift position switch signal
| - Ignition switch ON
- Shift lever in S
| 11 to 14 V
|
- Ignition switch ON
- Shift lever "-" position (down-shift)
| Below 1 V
|
D56-7 (S1) - D56-81 (E1)
| R - BR
| S1 solenoid signal
| 1st gear
| Below 1 V
|
Not on 1st gear
| 11 to 14 V
|
D56-6 (S2) - D56-81 (E1)
| W - BR
| S2 solenoid signal
| 1st, 2nd or 6th gear
| 11 to 14 V
|
3rd, 4th or 5th gear
| Below 1 V
|
D56-3 (S3) - D56-81 (E1)
| G-W - BR
| S3 solenoid signal
| 1st, 2nd or 3rd gear
| 11 to 14 V
|
4th, 5th or 6th gear
| Below 1 V
|
D56-5 (S4) - D56-81 (E1)
| G-R - BR
| S4 solenoid signal
| 5th or 6th gear
| 11 to 14 V
|
1st, 2nd, 3rd or 4th gear
| Below 1 V
|
D56-4 (SR) - D56-81 (E1)
| G - BR
| SR solenoid signal
| 1st, 2nd, 3rd or 4th gear
| 11 to 14 V
|
5th or 6th gear
| Below 1 V
|
D56-14 (SL1+) - D56-15 (SL1-)
| Y - L
| SL1 solenoid signal
| 5th or 6th gear
| Pulse generation (see waveform 1)
|
D56-12 (SL2+) - D56-13 (SL2-)
| G-R - L-W
| SL2 solenoid signal
| Engine is idling
| Pulse generation (see waveform 2)
|
D56-9 (SLT+) - D56-8 (SLT-)
| B - G-B
| SLT solenoid signal
| Engine is idling
| Pulse generation (see waveform 3)
|
D56-10 (SLU+) - D56-11 (SLU-)
| L-Y - L-R
| SLU solenoid signal
| 5th (lock-up) gear or 6th (lock-up) gear
| Pulse generation (see waveform 4)
|
D56-122 (THO1) - D56-98 (ETHA)
| G-Y - BR
| No. 1 ATF temperature sensor signal
| No. 1 ATF temperature: 115°C (239°F) or more
| Below 1.5 V
|
D56-99 (THO2) - D56-98 (ETHA)
| L - BR
| No. 2 ATF temperature sensor signal
| No. 2 ATF temperature: 115°C (239°F) or more
| Below 1.5 V
|
D56-101 (SP2+) - D56-100 (SP2-)
| Y - B
| Speed sensor SP2 signal
| Vehicle speed 20 km/h (12 mph)
| Pulse generation (see waveform 5)
|
D56-124 (NT+) - D56-123 (NT-)
| Y - B
| Speed sensor NT signal
| Engine is idling (shift lever in P or N)
| Pulse generation (see waveform 6)
|
A27-10 (CANH) - D56-81 (E1)
| GR - BR
| CAN communication line
| Ignition switch ON
| Pulse generation (see waveform 7)
|
A27-11 (CANL) - D56-81 (E1)
| W - BR
| CAN communication line
| Ignition switch ON
| Pulse generation (see waveform 8)
|
A27-51 (PWR) - D56-81 (E1)
| L - BR
| Tow/haul pattern select switch signal
| - Ignition switch ON
- Tow/haul pattern select switch ON
| 0 to 1.5 V
|
- Ignition switch ON
- Tow/haul pattern select switch OFF
| Pulse generation*
|