Home › Steering › STEERING COLUMN › POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM

POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM > SYSTEM DIAGRAM

for Preparation Click here



C159012E04


Communication Table 
Sender
Receiver
Signal
Line
Main body ECU
Multiplex tilt and telescopic ECU
  1. Ignition switch ON signal
  2. Unlock warning switch signal
CAN communication
Multiplex tilt and telescopic ECU
Front power seat control switch LH
  1. Tilt and telescopic execution signal
  2. Tilt and telescopic completion signal
CAN communication
Front power seat control ECU and switch LH
Multiplex tilt and telescopic ECU
  1. Memory command of Memory 1 for driver's seat
  2. Memory command of Memory 2 for driver's seat
  3. Play command of Memory 1 for driver's seat
  4. Play command of Memory 2 for driver's seat
  5. Start signal to play tilt and telescopic steering
  6. Stop signal to play tilt and telescopic steering
CAN communication
Combination meter ECU
Multiplex tilt and telescopic ECU
Vehicle speed signal (meter to other)
CAN communication