Home › Engine / Hybrid System ยท 3UR-FE › FUEL › FUEL PUMP

FUEL PUMP > REASSEMBLY

for Preparation Click here



1. INSTALL FUEL PUMP


    A152232
  1. Install the fuel pump harness.



    A152234E01
  1. Apply a light coat of gasoline to a new O-ring. Then install the O-ring and spacer to the fuel pump.



    A152231
  1. Attach the 5 claws to the claw holes and install the fuel pump and suction plate with filter.



2. INSTALL SUB TANK SUB-ASSEMBLY


    A152230
  1. Attach the 2 claws to the claw holes and install the sub tank sub-assembly.



    A152229
  1. Attach the 3 claws to the claw holes.



    A152228
  1. Connect the fuel tube.



    A152225
  1. Install the tube part to the sub tank sub-assembly.

    1. Attach the claw on the end of the tube to the claw hole. Install the tube to the 2 clamps on the sub tank sub-assembly.



    A152227
  1. Connect the fuel pump connector.



3. INSTALL FUEL SENDER GAUGE


    A152223
  1. Set the sender gauge to the sub tank sub-assembly. Then slide the sender gauge downward to install it.

  1. Connect the fuel sender gauge connector.