FUEL PUMP > REASSEMBLY |
| 1. INSTALL FUEL PUMP |
![]() |
Install the fuel pump harness.
![]() |
Apply a light coat of gasoline to a new O-ring. Then install the O-ring and spacer to the fuel pump.
![]() |
Attach the 5 claws to the claw holes and install the fuel pump and suction plate with filter.
| 2. INSTALL SUB TANK SUB-ASSEMBLY |
![]() |
Attach the 2 claws to the claw holes and install the sub tank sub-assembly.
![]() |
Attach the 3 claws to the claw holes.
![]() |
Connect the fuel tube.
![]() |
Install the tube part to the sub tank sub-assembly.
Attach the claw on the end of the tube to the claw hole. Install the tube to the 2 clamps on the sub tank sub-assembly.
![]() |
Connect the fuel pump connector.
| 3. INSTALL FUEL SENDER GAUGE |
![]() |
Set the sender gauge to the sub tank sub-assembly. Then slide the sender gauge downward to install it.
Connect the fuel sender gauge connector.