WIPER AND WASHER SYSTEM > PRECAUTION |
| 1.WASHER NOZZLE ADJUSTMENT PRECAUTION |
Do not clean or adjust the washer nozzle using objects such as needles or safety pins, because;
The washer nozzle tip is made of resin and could be damaged.
Adjustment is not necessary as the washer nozzle is a spray type.
If the washer nozzle is clogged with substances such as car wax, remove it and clean the nozzle hole with a soft resin brush or similar tool.
| 2.REAR WIPER AND WASHER OPERATION |
When the following conditions are satisfied, rear wiper and washer are driven.