Home › Drivetrain ยท AB60F AUTOMATIC TRANSMISSION / TRANSAXLE › PARK / NEUTRAL POSITION SWITCH

PARK / NEUTRAL POSITION SWITCH > ADJUSTMENT

for Preparation Click here



1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY


D025795E10
  1. Loosen the bolt of the park/neutral position switch and move the shift lever to N.

  1. Align the groove with the neutral basic line.

  1. Hold the switch in the position described above and tighten the bolt.

    Torque:
    13 N*m{ 133 kgf*cm , 10 ft.*lbf }

  1. After the adjustment, perform the On-Vehicle Inspection (Click here).