FRONT BRAKE > REMOVAL |
| 1. REMOVE FRONT WHEEL |
| 2. REMOVE FRONT DISC BRAKE PAD KIT |
![]() |
Remove the pin hold clip.
Remove the hole pins.
![]() |
Remove the front disc brake anti-rattle spring.
![]() |
Remove the 2 pads from the disc brake caliper.
Remove the No. 1 and No. 2 anti-squeal shims from each pad.
| 3. DISCONNECT NO. 7 FRONT BRAKE TUBE |
![]() |
Using a union nut wrench (10 mm), disconnect the front brake tube from the disc brake caliper.
| 4. DRAIN BRAKE FLUID |
| 5. REMOVE FRONT DISC BRAKE CALIPER ASSEMBLY LH |
![]() |
Remove the 2 bolts and disc brake caliper from the knuckle.
| 6. REMOVE FRONT DISC |
![]() |
Put matchmarks on the front disc and axle hub if planning to reuse the disc.
Remove the front disc.