Home › Audio/Visual/Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM

NAVIGATION SYSTEM > The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK CELLULAR PHONE
  1. Check if the voice on the other side can be heard using a cellular phone.

    OK:
    Voice can be heard.



NG
REPAIR OR REPLACE CELLULAR PHONE
OK


2.CHECK NAVIGATION SYSTEM
  1. Check that voice guidance can be heard from the driver side speaker.

    OK:
    Voice guidance can be heard.



NG
GO TO "VOICE GUIDANCE DOES NOT FUNCTION" IN PROBLEM SYMPTOMS TABLE (Click here)
OK


3.CHECK SETTINGS


    E147700E01
  1. Check if the volume level is set to a low level on the CALL screen.

    OK:
    The level is not low.



NG
SET VOLUME TO HIGH
OK


4.CHECK SETTINGS


    E147701E01
  1. Enter the "Handsfree Voice Quality Set" mode (Click here).

  1. Check if the Receive Voice Level is set to "0".

    HINT:
    The Receive Voice Level can be set to 11 different levels, -5 to +5, with a 3 dB difference.

  1. Check if the Receive Voice Level is set to the minimum or maximum level.

    HINT:
    When the Receive Voice Level is set to the minimum or maximum level, the sound may be distorted.

    OK:
    The Receive Voice Level is set to "0".



NG
SET RECEIVE VOICE LEVEL TO "0"
OK

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)