FRONT AXLE HUB > INSTALLATION |
| 1. INSTALL FRONT AXLE HUB SUB-ASSEMBLY LH (for 2WD) |
Apply MP grease to a new O-ring.
Install the O-ring to the axle hub.
![]() |
Install the dust cover and axle hub to the steering knuckle with the 4 bolts.
| 2. INSTALL FRONT AXLE HUB SUB-ASSEMBLY LH (for 4WD) |
Apply MP grease to a new O-ring.
Install the O-ring to the axle hub.
Connect the front drive shaft to the front axle hub.
![]() |
Install the dust cover and axle hub to the steering knuckle with the 4 bolts.
| 3. INSTALL FRONT AXLE HUB NUT LH (for 4WD) |
Clean the threaded parts on the drive shaft and axle hub nut using a non-residue solvent.
Using a 39 mm socket wrench, install the hub nut.
![]() |
Install the front wheel adjusting lock cap and a new cotter pin.
| 4. INSPECT FRONT AXLE HUB |
Inspect the front axle hub (Click here).
| 5. INSTALL FRONT AXLE HUB GREASE CAP LH (for 4WD) |
Install the axle hub grease cap.
| 6. INSTALL FRONT DISC LH |
![]() |
Align the matchmarks, and then install the front disc.
| 7. CONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH |
![]() |
Connect the front disc brake caliper and install 2 new bolts.
![]() |
Connect the brake tube bracket to the steering knuckle with the bolt.
| 8. INSTALL FRONT WHEEL |
| 9. CHECK SPEED SENSOR SIGNAL |
Check the speed sensor signal (Click here).