Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER FAN

CONDENSER FAN > REMOVAL

for Preparation Click here



1. REMOVE SHROUD BLOWER ASSEMBLY


I104354
  1. Disconnect the connector and 2 clamps.

  1. Remove the 2 bolts and the shroud blower.



2. REMOVE COOLING FAN ASSEMBLY


I104355
  1. Remove the 3 screws and cooling fan.



3. REMOVE COOLING FAN MOTOR


I104356
  1. Disengage the 2 clamps.

  1. Remove the 3 screws and the cooling fan motor.



4. REMOVE BUSH


I104357E01
  1. Remove the 2 grommets and 2 bushes.