ROOM LIGHT SWITCH > INSPECTION |
| 1. INSPECT INTERIOR DOME LIGHT SWITCH ASSEMBLY |
![]() |
Check the resistance.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
| 5 (FCTY) - 10 (FLMP) | DOOR | Below 1 Ω |
| 7 (E) - 10 (FLMP) | ON | Below 1 Ω |
Check the illumination operation.
Connect the positive (+) battery lead to terminal 1 (Ill+) and the negative (-) battery lead to terminal 4 (Ill-), and then check that the illumination illuminates.