Home › Vehicle Interior › LIGHTING (INT) › FRONT DOOR COURTESY SWITCH

FRONT DOOR COURTESY SWITCH > INSPECTION

for Preparation Click here



1. INSPECT COURTESY LIGHT SWITCH



E142632E04

  1. Check the resistance.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      1 - Switch body
      ON (Not pushed)
      Below 1 Ω
      1 - Switch body
      OFF (Pushed)
      10 kΩ or higher

      If the result is not as specified, replace the courtesy light switch.