Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW REGULATOR MOTOR

POWER WINDOW REGULATOR MOTOR > INSPECTION

for Preparation Click here



1. INSPECT FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH


    B194348E01
  1. Check the operation of the regulator motor.

    NOTICE:
    1. Do not apply voltage to any terminals of the motor, except terminal 2, to avoid damaging the pulse sensor inside the motor.
    2. Reset the power window regulator motor (initialize the pulse sensor) after installing the power window regulator motor and regulator assembly onto the door (Click here).


    1. Apply battery voltage to the regulator motor and check the operation of the regulator motor.

      OK:
      Measurement Condition
      Motor Condition
      Specified Condition
      Battery positive (+) → Terminal 2
      Battery negative (-) → Terminal 1, 4 and 10
      Auto
      Motor gear rotates clockwise
      Battery positive (+) → Terminal 2
      Battery negative (-) → Terminal 1, 4 and 7
      Motor gear rotates counterclockwise
      Battery positive (+) → Terminal 2
      Battery negative (-) → Terminal 1 and 10
      Manual
      Motor gear rotates clockwise
      Battery positive (+) → Terminal 2
      Battery negative (-) → Terminal 1 and 7
      Motor gear rotates counterclockwise

      If the result is not as specified, replace the power window regulator motor.



2. INSPECT FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH


    B194349E01
  1. Check the operation of the regulator motor.

    NOTICE:
    1. Do not apply voltage to any terminals of the motor, except terminal 2, to avoid damaging the pulse sensor inside the motor.
    2. Reset the power window regulator motor (initialize the pulse sensor) after installing the power window regulator motor and regulator assembly onto the door (Click here).


    1. Apply battery voltage to the regulator motor and check the operation of the regulator motor.

      OK:
      Measurement Condition
      Motor Condition
      Specified Condition
      Battery positive (+) → Terminal 2
      Battery negative (-) → Terminal 1, 4 and 7
      Auto
      Motor gear rotates clockwise
      Battery positive (+) → Terminal 2
      Battery negative (-) → Terminal 1, 4 and 10
      Motor gear rotates counterclockwise
      Battery positive (+) → Terminal 2
      Battery negative (-) → Terminal 1 and 7
      Manual
      Motor gear rotates clockwise
      Battery positive (+) → Terminal 2
      Battery negative (-) → Terminal 1 and 10
      Motor gear rotates counterclockwise

      If the result is not as specified, replace the power window regulator motor.



3. INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH


    B195594E01
  1. Check the operation of the regulator motor.

    1. Apply battery voltage to the regulator motor and check the operation of the regulator motor.

      OK:
      Measurement Condition
      Specified Condition
      Battery position (+) → Terminal 1
      Battery negative (-) → Terminal 2
      Motor gear rotates clockwise
      Battery position (+) → Terminal 2
      Battery negative (-) → Terminal 1
      Motor gear rotates counterclockwise

      If the result is not as specified, replace the power window regulator motor.



4. INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH


    B195595E01
  1. Check the operation of the regulator motor.

    1. Apply battery voltage to the regulator motor and check the operation of the regulator motor.

      OK:
      Measurement condition
      Specified Condition
      Battery positive (+) → Terminal 2
      Battery negative (-) → Terminal 1
      Motor gear rotates clockwise
      Battery positive (+) → Terminal 1
      Battery negative (-) → Terminal 2
      Motor gear rotates counterclockwise

      If the result is not as specified, replace the power window regulator motor.