Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE HOOD COURTESY SWITCH

ENGINE HOOD COURTESY SWITCH > INSPECTION

for Preparation Click here



1. INSPECT HOOD LOCK ASSEMBLY


B192531E01
  1. Check the resistance of the engine hood courtesy switch.

    1. Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      Lock
      10 kΩ or higher
      1 - 2
      Unlock
      Below 1 Ω

      If the results is not as specified, replace the hood lock.