Home › Vehicle Interior › HEATING / AIR CONDITIONING › REAR BLOWER MOTOR

REAR BLOWER MOTOR > INSPECTION

for Preparation Click here



1. INSPECT BLOWER WITH FAN (REAR) MOTOR SUB-ASSEMBLY


I104454E01
  1. Apply battery voltage and check operation of the horn, as shown in the table.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → Terminal 2
    Battery negative (-) → Terminal 1
    Motor operates smoothly

    If the result is not as specified, replace the blower with fan (rear) motor sub-assembly.