Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE MASTER CYLINDER

BRAKE MASTER CYLINDER > REASSEMBLY

for Preparation Click here



1. INSTALL MASTER CYLINDER RESERVOIR GROMMET
  1. Apply lithium soap base glycol grease to the 2 grommets and install them onto the master cylinder body.



2. INSTALL BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY
  1. Install the master cylinder reservoir onto the master cylinder body.



    C154472
  1. Using a T25 "TORX" socket wrench, install the screw.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }