Standard
Terminal No. (Symbol)
| Wiring Color
| Terminal Description
| Condition
| Specified Condition
|
O16-7 (SLRL) - O17-5 (GND)
| BE - W-B
| Height control valve (Gate solenoid valve)
| Ignition switch ON
| Below 1.0 V
|
Engine idling, button of height control switch is pushed from "DOWN" to "UP"
| 9 V or more
|
O16-8 (SLEX) - O17-5 (GND)
| V - W-B
| Exhaust valve
| Ignition switch ON
| Below 1.0 V
|
Engine idling, button of height control switch is pushed from "UP" to "DOWN"
| 9 V or more
|
O16-9 (SLRR) - O17-5 (GND)
| B - W-B
| Height control valve (Leveling solenoid valve)
| Ignition switch ON
| Below 1.0 V
|
Engine idling, button of height control switch is pushed from "DOWN" to "UP"
| 9 V or more
|
O16-18 (RC) - O17-5 (GND)
| LG - W-B
| Suspension control relay
| Ignition switch ON
| Below 1.0 V
|
Engine idling, button of height control switch is pushed from "DOWN" to "UP"
| 9 V or more
|
O16-19 (SGR2) - O17-5 (GND)
| BR - W-B
| Rear height control sensor RH ground
| Always
| Below 1.0 Ω
|
O16-20 (SBR2) - O16-19 (SGR2)
| L - BR
| Height control sensor RH power source
| Ignition switch ON
| 4.5 to 5.5 V
|
O16-21 (SGL2) - O17-5 (GND)
| V - W-B
| Height control sensor LH ground
| Always
| Below 1.0 Ω
|
O16-22 (SBL2) - O16-21 (SGL2)
| LG - V
| Height control sensor LH power source
| Ignition switch ON
| 4.5 to 5.5 V
|
O16-23 (SHRL) - O16-21 (SGL2)
| Y - V
| Height control sensor LH
| Ignition switch ON
| 0.5 to 4.5 V
|
Engine idling, vehicle height is changed from "HIGH" to "NORMAL" by pressing the height control switch
| 2.4 to 2.7 V
|
O16-24 (SHRR) - O16-19 (SGR2)
| R - BR
| Height control sensor RH
| Ignition switch ON
| 0.5 to 4.5 V
|
Engine idling, vehicle height is changed from "HIGH" to "NORMAL" by pressing the height control switch
| 2.4 to 2.7 V
|
O16-25 (RM+) - O17-5 (GND)
| G - W-B
| Motor lock (+)
| Engine idling, vehicle height changes from "NORMAL" to "HIGH" by pressing the height control switch (While height control compressor assembly is working).
| Below 1.0 Ω
|
O16-26 (RM-) - O17-5 (GND)
| P - W-B
| Motor lock (-)
| Always
| Below 1.0 Ω
|
O17-5 (GND) - Body ground
| W-B - Body ground
| Ground
| Always
| Below 1.0 Ω
|
O17-6 (B) - O17-5 (GND)
| SB - W-B
| +B power supply
| Ignition switch ON
| 10 to 14 V
|
O17-15 (DNSW) - O17-5 (GND)
| GR - W-B
| Height control switch (DOWN)
| Ignition switch ON, "DOWN" button of height control switch pushed in
| Below 1.5 V
|
Ignition switch ON, "DOWN" button of height control switch released
| 10 to 14 V
|
O17-16 (UPSW) - O17-5 (GND)
| Y - W-B
| Height control switch (UP)
| Ignition switch ON, "UP" button of height control switch pushed in
| Below 1.5 V
|
Ignition switch ON, "UP" button of height control switch released
| 10 to 14 V
|
O17-18 (SBR) - O17-22 (SGR)
| G - V
| Front acceleration sensor RH power source
| Ignition switch ON
| 4.5 to 5.5 V
|
O17-21 (SBR3) - O18-25 (SGR3)
| P - B
| Front acceleration sensor LH power source
| Ignition switch ON
| 4.5 to 5.5 V
|
O17-22 (SGR) - Body ground
| V - Body ground
| Front acceleration sensor RH ground
| Always
| Below 1.0 Ω
|
O17-24 (TD) - O17-5 (GND)
| L - W-B
| Height control mode select switch
| Ignition switch ON, Height control select switch ON
| Below 1.5 V
|
Ignition switch ON, Height control select switch OFF
| 10 to 14 V
|
O18-1 (GND) - Body ground
| W-B - Body ground
| Ground
| Always
| Below 1.0 Ω
|
O18-2 (TSW2) - O17-5 (GND)
| V - W-B
| Absorber control switch (SPORT)
| Ignition switch ON, Absorber control switch select "NORMAL"
| 10 to 14 V
|
Ignition switch ON, Absorber control switch select "SPORT"
| Below 1.5 V
|
O18-3 (TSW1) - O17-5 (GND)
| R - W-B
| Absorber control switch (COMFORT)
| Ignition switch ON, Absorber control switch select "NORMAL"
| 10 to 14 V
|
Ignition switch ON, Absorber control switch select "COMFORT"
| Below 1.5 V
|
O18-10 (IG) - O18-1 (GND)
| R - W-B
| IG power supply
| Ignition switch ON
| 10 to 14 V
|
O18-25 (SGR3) - O17-5 (GND)
| B - W-B
| Front acceleration sensor LH ground
| Always
| Below 1.0 Ω
|
O18-27 (SGFR) - O17-22 (SGR)
| Y - V
| Front acceleration sensor RH
| Always
| 0.5 to 4.5 V
|
O18-28 (SGRR) - O18-25 (SGR3)
| BE - B
| Front acceleration sensor LH
| Always
| 0.5 to 4.5 V
|
O18-29 (CANL) - O18-1 (GND)
| W - W-B
| CAN communication line
| Ignition switch ON
| Pulse generation (See waveform 1)
|
O18-30 (CANH) - O18-1 (GND)
| B - W-B
| CAN communication line
| Ignition switch ON
| Pulse generation (See waveform 2)
|