AIR SUSPENSION SYSTEM (w/o AVS) > DTC CHECK / CLEAR |
| CHECK DTC |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Read the DTCs following the prompts on the Techstream screen. Enter the following menus: Chassis / Air suspension / Trouble Codes.
Check the details of the DTCs (Click here).
| CLEAR DTC |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Operate the Techstream to clear the codes. Enter the following menus: Chassis / Air suspension / Trouble Codes.
According to the display on the Techstream, select the trouble code data display with the clear button.