Home › Suspension › SUSPENSION CONTROL › HEIGHT CONTROL SENSOR

HEIGHT CONTROL SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH


C180589
  1. Install the rear height control sensor with the nut.

    Torque:
    13 N*m{ 127 kgf*cm , 9 ft.*lbf }

  1. Connect the rear height control sensor connector.



    C180588
  1. Align the matchmark on the rear height control sensor link and bracket.

  1. Install the rear height control sensor link with the nut.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }



2. ADJUST VEHICLE HEIGHT
(Click here)