FRONT LOWER SUSPENSION ARM > REMOVAL |
| 1. REMOVE FRONT WHEEL |
| 2. REMOVE FRONT STABILIZER LINK ASSEMBLY LH |
![]() |
Remove the bolt, nut and stabilizer link.
| 3. DISCONNECT FRONT SHOCK ABSORBER WITH COIL SPRING LH |
![]() |
Remove the nut and bolt, and disconnect the shock absorber from the lower side.
| 4. DISCONNECT FRONT LOWER BALL JOINT ATTACHMENT LH |
![]() |
Remove the 2 bolts and disconnect the attachment from the steering knuckle.
| 5. REMOVE FRONT NO. 1 SUSPENSION ARM SUB-ASSEMBLY LOWER LH |
![]() |
Place matchmarks on the No. 2 camber adjusting cam and No. 2 toe adjusting plate.
Remove the nut, washer, No. 2 camber adjusting cam, camber adjusting cam assembly, bolt, toe adjusting cam, No. 2 toe adjusting plate and front No. 1 suspension arm lower LH.
| 6. REMOVE FRONT LOWER BALL JOINT ATTACHMENT LH |
Remove the cotter pin and nut.
![]() |
Using SST, remove the lower ball joint attachment.