Home › Audio/Visual/Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM

DTC    63-41    Wrong Disc

DTC    63-42    Disc cannot be Read

for Preparation Click here


DESCRIPTION


DTC Code
DTC Detection Condition
Trouble Area
63-41
Unsuitable disc is inserted.
  1. Disc
  2. Navigation receiver assembly
63-42
Disc cannot be read.

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs (Click here).

1.CHECK DISC


    I100152
  1. Check that the disc is not deformed or cracked.

    OK:
    No deformations or cracks on the disc.



NG
CHANGE DISC
OK


2.DISC CLEANING


    I100151
  1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

    NOTICE:
    Do not use a conventional record cleaner or antistatic preservative.


NEXT


3.CLEAR DTC
  1. Clear the DTCs (Click here).


NEXT


4.RECHECK DTC
  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    Malfunction disappears.



NG
Go to step 5
OK

DISC WAS DIRTY 

5.REPLACE DISC WITH ANOTHER AND RECHECK
  1. Replace the disc with a normal one.

  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    Malfunction disappears.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

DISC IS FAULTY