Home › Engine / Hybrid System ยท CRUISE CONTROL › DISTANCE CONTROL ECU

DISTANCE CONTROL ECU > INSTALLATION

for Preparation Click here



1. INSTALL DISTANCE CONTROL ECU ASSEMBLY


E141174
  1. Install the distance control ECU with the bolt.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }

    NOTICE:
    Do not install the distance control ECU assembly if it has been damaged or received some sort of shock.

  1. Connect the connector.



2. INSTALL MAIN BODY ECU (COWL SIDE JUNCTION BLOCK LH)


I104428
  1. Install the main body ECU with the bolt and nut.

  1. Connect the connectors and clamp.



3. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD INSERT


B192337
  1. Connect the connector and engage the clamp.

  1. Engage the 2 claws to install the safety pad insert.

  1. Install the 4 <A> bolts.



4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH


B192333
  1. Engage the 2 claws and install the sensor.

  1. Connect the connectors.

  1. Engage the 4 clips and claw and install the finish panel.

  1. Install the 2 <A> bolts.



5. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    B192511
  1. Connect the hood lock control cable assembly to the hood lock control lever sub-assembly.

  1. engage the 3 claws to install the hood lock lever



6. INSTALL INSTRUMENT SIDE PANEL LH


    B192332
  1. Engage the 4 guides and 3 claws and install the side panel.



7. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
  1. Install the front door opening trim weatherstrip LH.



8. INSTALL COWL SIDE TRIM BOARD LH

HINT:
Use the same procedure for both sides.



9. INSTALL FRONT DOOR SCUFF PLATE LH

HINT:
Use the same procedure for both sides.



10. INITIALIZE DISTANCE CONTROL ECU
  1. Initialize the distance control ECU (Click here).