REAR POWER SEAT CONTROL SYSTEM > TERMINALS OF ECU |
| CHECK FOLD SEAT CONTROL ECU LH |

Disconnect the O33 and O34 ECU connectors.
Measure the voltage and resistance of the wire harness side connectors.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
| O33-4 (+B) - O33-8 (GND) | P - W-B | Power source (Battery) | Always | 11 to 14 V |
| O33-8 (GND) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| O33-9 (GND2) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| O33-10 (+B2) - O33-9 (GND2) | V - W-B | Power source (Battery) | Always | 11 to 14 V |
| O34-3 (IG) - O33-8 (GND) | R - W-B | Power source (IG) | Ignition switch ON | 11 to 14 V |
| Ignition switch off | Below 1 V |
Reconnect the O33 and O34 ECU connectors.
Measure the voltage and resistance of the connectors.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
| O33-1 (FLD+) - O33-8 (GND) | B - W-B | No. 2 reclining motor operation signal | Ignition switch ON Rear power seat switch LH forward | 11 to 14 V |
| O33-2 (RCL+) - O33-8 (GND) | SB - W-B | No. 1 reclining motor operation signal | Ignition switch ON Rear power seat switch LH forward | 11 to 14 V |
| O33-5 (FLD-) - O33-8 (GND) | W - W-B | No. 2 reclining motor operation signal | Ignition switch ON Rear power seat switch LH backward | 11 to 14 V |
| O33-6 (RCL-) - O33-8 (GND) | R - W-B | No. 1 reclining motor operation signal | Ignition switch ON Rear power seat switch LH backward | 11 to 14 V |
| O34-4 (R CL) - O33-8 (GND) | G - W-B | Rear door courtesy switch signal | Rear door courtesy switch LH OFF | 11 to 14 V |
| Rear door courtesy switch LH ON | Below 1 V | |||
| O34-5 (BDCY) - O33-8 (GND) | V - W-B | Back door courtesy switch signal | Back door courtesy switch OFF | 11 to 14 V |
| Back door courtesy switch ON | Below 1 V | |||
| O34-10 (FLD2) - O33-8 (GND) | BE - W-B | No. 2 fold switch signal (Folding) | Rear LH door open No. 2 fold seat switch LH OFF | 11 to 14 V |
| Rear LH door open No. 2 fold seat switch LH folding | Below 1 V | |||
| O34-12 (RCLF) - O33-8 (GND) | LG - W-B | Reclining forward switch signal | Always | 11 to 14 V |
| Rear power seat switch LH forward | Below 1 V | |||
| O34-13 (RCLR) - O33-8 (GND) | SB - W-B | Reclining backward switch signal | Always | 11 to 14 V |
| Rear power seat switch LH backward | Below 1 V | |||
| O34-14 (RTN2) - O33-8 (GND) | BR - W-B | No. 2 return switch signal (Return) | Rear LH door open No. 2 fold seat switch LH OFF | 11 to 14 V |
| Rear LH door open No. 2 fold seat switch LH return | Below 1 V | |||
| O34-15 (RTRN) - O33-8 (GND) | B - W-B | No. 1 return switch signal (Return) | Back door open No. 1 fold seat switch LH OFF | 11 to 14 V |
| Back door open No. 1 fold seat switch LH return | Below 1 V | |||
| O34-16 (FOLD) - O33-8 (GND) | P - W-B | No. 1 fold switch signal (Folding) | Back door open No. 1 fold seat switch LH OFF | 11 to 14 V |
| Back door open No. 1 fold seat switch LH folding | Below 1 V | |||
| O34-22 (SRCL) - O34-36 (SG2) | G - V | Reclining position sensor signal | Motor is operating | Below 1 V ←→ 11 to 14 V Pulse generation |
| O34-25 (SV2) - O34-36 (SG2) | L - V | Position sensor power supply | Back door open | 11 to 14 V |
| O34-31 (IND3) - O33-8 (GND) | W - W-B | No. 2 fold seat switch indicator signal | Rear LH door open No. 2 fold seat switch LH ON:
| Below 1 V ←→ 11 to 14 V Pulse generation |
| When the indicator is illuminated | 9 to 13 V | |||
| O34-32 (P) - O33-8 (GND) | GR - W-B | Park/Neutral position switch signal | Ignition switch ON Park/Neutral position switch P position | 11 to 14 V |
| Ignition switch ON Park/Neutral position switch not in P position | Below 1 V | |||
| O34-35 (IND1) - O33-8 (GND) | Y - W-B | No. 1 fold seat switch indicator signal | Back door open No. 1 fold seat switch LH ON:
| Below 1 V ←→ 11 to 14 V Pulse generation |
| When the indicator is illuminated | 9 to 13 V | |||
| O34-36 (SG2) - Body ground | V - Body ground | Position sensor ground | Always | Below 1 Ω |
| CHECK FOLD SEAT CONTROL ECU RH |

Disconnect the P19 and P20 ECU connectors.
Measure the voltage and resistance of the wire harness side connectors.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
| P19-4 (+B) - P19-8 (GND) | LG - W-B | Power source (Battery) | Always | 11 to 14 V |
| P19-8 (GND) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| P19-9 (GND2) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |
| P19-10 (+B2) - P19-9 (GND2) | B - W-B | Power source (Battery) | Always | 11 to 14 V |
| P20-3 (IG) - P19-8 (GND) | P - W-B | Power source (IG) | Ignition switch ON | 11 to 14 V |
| Ignition switch off | Below 1 V |
Reconnect the P19 and P20 ECU connectors.
Measure the voltage and resistance of the connectors.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
| P19-1 (FLD+) - P19-8 (GND) | G - W-B | No. 2 reclining motor operation signal | Ignition switch ON Rear power seat switch RH forward | 11 to 14 V |
| P19-2 (RCL+) - P19-8 (GND) | BE - W-B | No. 1 reclining motor operation signal | Ignition switch ON Rear power seat switch RH forward | 11 to 14 V |
| P19-5 (FLD-) - P19-8 (GND) | R - W-B | No. 2 reclining motor operation signal | Ignition switch ON Rear power seat switch RH backward | 11 to 14 V |
| P19-6 (RCL-) - P19-8 (GND) | W - W-B | No. 1 reclining motor operation signal | Ignition switch ON Rear power seat switch RH backward | 11 to 14 V |
| P20-4 (R CL) - P19-8 (GND) | G - W-B | Rear door courtesy switch signal | Rear door courtesy switch RH OFF | 11 to 14 V |
| Rear door courtesy switch RH ON | Below 1 V | |||
| P20-5 (BDCY) - P19-8 (GND) | G - W-B | Back door courtesy switch signal | Back door courtesy switch OFF | 11 to 14 V |
| Back door courtesy switch ON | Below 1 V | |||
| P20-10 (FLD2) - P19-8 (GND) | BE - W-B | No. 2 fold switch signal (Folding) | Rear RH door open No. 2 fold seat switch RH OFF | 11 to 14 V |
| Rear RH door open No. 2 fold seat switch RH folding | Below 1 V | |||
| P20-12 (RCLF) - P19-8 (GND) | LG - W-B | Reclining forward switch signal | Always | 11 to 14 V |
| Rear power seat switch RH forward | Below 1 V | |||
| P20-13 (RCLR) - P19-8 (GND) | SB - W-B | Reclining backward switch signal | Always | 11 to 14 V |
| Rear power seat switch RH backward | Below 1 V | |||
| P20-14 (RTN2) - P19-8 (GND) | SB - W-B | No. 2 return switch signal (Return) | Rear RH door Open No. 2 fold seat switch RH OFF | 11 to 14 V |
| Rear RH door Open No. 2 fold seat switch RH return | Below 1 V | |||
| P20-15 (RTRN) - P19-8 (GND) | B - W-B | No. 1 return switch signal (Return) | Back door open No. 1 fold seat switch RH OFF | 11 to 14 V |
| Back door open No. 1 fold seat switch RH return | Below 1 V | |||
| P20-16 (FOLD) - P19-8 (GND) | P - W-B | No. 1 fold switch signal (Folding) | Back door open No. 1 fold seat switch RH OFF | 11 to 14 V |
| Back door open No. 1 fold seat switch RH folding | Below 1 V | |||
| P20-22 (SRCL) - P20-36 (SG2) | G - V | Reclining position sensor signal | Motor is operating | Below 1 V ←→ 11 to 14 V Pulse generation |
| P20-25 (SV2) - P20-36 (SG2) | L - V | Position sensor power supply | Back door open | 11 to 14 V |
| P20-31 (IND3) - P19-8 (GND) | W - W-B | No. 2 fold seat switch indicator signal | Rear RH door open No. 2 fold seat switch RH ON:
| Below 1 V ←→ 11 to 14 V Pulse generation |
| When the indicator is illuminated | 9 to 13 V | |||
| P20-32 (P) - P19-8 (GND) | GR - W-B | Park/Neutral position switch signal | Ignition switch ON Park/Neutral position switch P position | 11 to 14 V |
| Ignition switch ON Park/Neutral position switch not in P position | Below 1 V | |||
| P20-35 (IND1) - P19-8 (GND) | L - W-B | No. 1 fold seat switch indicator signal | Back door open No. 1 fold seat switch RH ON:
| Below 1 V ←→ 11 to 14 V Pulse generation |
| When the indicator is illuminated | 9 to 13 V | |||
| P20-36 (SG2) - Body ground | V - Body ground | Position sensor ground | Always | Below 1 Ω |