Home › Drivetrain ยท DRIVE SHAFT / PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY (for 2WD)

PROPELLER SHAFT ASSEMBLY (for 2WD) > REMOVAL

for Preparation Click here



1. REMOVE PROPELLER SHAFT ASSEMBLY (for 2UZ-FE)


    C179257E01
  1. Place matchmarks on the propeller shaft flange and differential flange.

  1. Remove the 4 nuts and remove the propeller shaft assembly.



    C164127E03
  1. Insert SST into the transmission to prevent oil leakage.

    SST
    09325-40010  



2. REMOVE PROPELLER SHAFT ASSEMBLY (for 3UR-FE)


    C179257E01
  1. Place matchmarks on the propeller shaft flange and differential flange.

  1. Remove the 4 nuts and remove the propeller shaft assembly.



    C160071E02
  1. Insert SST into the transmission to prevent oil leakage.

    SST
    09325-60010