Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR CLOSER SYSTEM

BACK DOOR CLOSER SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC
  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch to ON.

  3. Read the DTCs by following the directions on the Techstream screen.

    HINT:
    Refer to the Techstream operator's manual for further details.


CLEAR DTC
  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch to ON.

  3. Clear the DTCs by following the directions on the Techstream screen.

    HINT:
    Refer to the Techstream operator's manual for further details.