OIL PUMP > REASSEMBLY |
| 1. INSTALL OIL PUMP GEAR SET |
![]() |
Place the drive and driven rotors into the pump body with the marks facing the pump body cover side.
![]() |
Install the oil pump cover with the 10 screws.
| 2. INSTALL OIL PUMP RELIEF VALVE |
![]() |
Insert the relief valve and compression spring into the oil pump body hole.
Install the plug.
| 3. INSTALL OIL PUMP SEAL |
![]() |
Using SST and a hammer, tap in a new oil seal until its surface is flush with the oil pump body edge.
Apply MP grease to the oil seal lip.