Home › Drivetrain · A750E AUTOMATIC TRANSMISSION / TRANSAXLE › PARK / NEUTRAL POSITION SWITCH

PARK / NEUTRAL POSITION SWITCH > INSPECTION

for Preparation Click here



1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY


C155868E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    2 (RB) - 5 (PL)
    Shift Position P
    Below 1 Ω
    2 (RB) - 5 (PL)
    Shift Position Not P
    10 kΩ or higher
    2 (RB) - 1 (RL)
    Shift Position R
    Below 1 Ω
    2 (RB) - 1 (RL)
    Shift Position Not R
    10 kΩ or higher
    2 (RB) - 7 (NL)
    Shift Position N
    Below 1 Ω
    2 (RB) - 7 (NL)
    Shift Position Not N
    10 kΩ or higher
    2 (RB) - 6 (DL)
    Shift Position D and S
    Below 1 Ω
    2 (RB) - 6 (DL)
    Shift Position Not D and S
    10 kΩ or higher
    3 (B) - 4 (L)
    Shift Position P and N
    Below 1 Ω
    3 (B) - 4 (L)
    Shift Position Not P and N
    10 kΩ or higher

    If the result is not as specified, replace the switch.