Home › Drivetrain ยท AB60E AUTOMATIC TRANSMISSION / TRANSAXLE › SPEED SENSOR

SPEED SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL SPEED SENSOR SP2
  1. Coat a new O-ring with ATF and install it to the sensor.



    C153312
  1. Install the sensor with the bolt.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. Connect the sensor connector.



2. INSTALL SPEED SENSOR NT
  1. Coat a new O-ring with ATF and install it to the sensor.



    C161098
  1. Install the sensor with the bolt.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. Connect the sensor connector.



3. INSPECT FOR AUTOMATIC TRANSMISSION FLUID LEAK