Home › Engine / Hybrid System ยท 2UZ-FE › FUEL › FUEL PRESSURE REGULATOR

FUEL PRESSURE REGULATOR > REMOVAL

for Preparation Click here



1. DISCHARGE FUEL SYSTEM PRESSURE
(Click here)


2. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY


    A159710
  1. Disconnect the vacuum hose from the fuel pressure regulator assembly.



    A159711
  1. Disconnect the fuel hose from the fuel pressure regulator assembly.

    CAUTION:
    Put a cloth or equivalent under the pressure regulator.

  1. Remove the 2 bolts, and pull out the fuel pressure regulator assembly.