PROPELLER SHAFT ASSEMBLY (for 4WD) > REMOVAL |
| 1. REMOVE PROPELLER SHAFT HEAT INSULATOR |
![]() |
Remove the 2 bolts and propeller shaft heat insulator.
| 2. REMOVE TRANSFER HEAT INSULATOR |
![]() |
Remove the 3 bolts and transfer heat insulator.
| 3. REMOVE PROPELLER SHAFT ASSEMBLY |
![]() |
Place matchmarks on the propeller shaft flange and differential flange.
Place matchmarks on the propeller shaft flange and transfer flange.
Remove the 8 nuts and then remove the propeller shaft assembly.